Separate names with a comma.
Discussion in 'Mechanic and Repair' started by topsites, Aug 20, 2007.
Other than a feeler gauge etc, what's the clearance specs, and is there anything else I should know?
Perform a leak-down test to make sure the valves are sealing. You might have to de-carbonize first.
The valve clearance is 0.10 mm. It does require a special feeler gauge to adjust. You can order part number 4180 007 1005. This is a kit that will include the feeler gauge, valve cover gasket, and copper sealing washer for the valve cover bolt.