aLignment

Discussion in 'Mechanic and Repair' started by Mic_bug, Dec 20, 2006.

  1. Mic_bug

    Mic_bug LawnSite Member
    from N.B. MI
    Posts: 201

    How many of you have gotten alignments on your z-turns.

    Is it common practice to get it done..my exmark seems to pull to a side.
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    The first thing to check is tire air pressure, Then hydro belt condition and adjustment (tension), Check stick linkage /joints for wear (slop). If all the mentioned are OK then take it in and have the tracking adjusted, (Unless you feel you can tackle that yourself).

    If the unit is tracking straight there is no need to have anything done, Only when it doesn't.
     
  3. MOW PRO LAWN SERVICE

    MOW PRO LAWN SERVICE LawnSite Bronze Member
    Posts: 1,567

    Common,is tire pressure if you don't know what you are doing i would not tackle it, i tried it on a grasshopper once and i killed a half a day, and still it was screwed up dealer fixed it.
     
  4. Lawn 'N' Order Landscape

    Lawn 'N' Order Landscape LawnSite Member
    Posts: 76

    What year is is the ZTR? I have a 06' Lazer Z and there is a adjustment on the control lever. Lift up the seat and there should be 2 nuts on the shaft that goes to pump from the control levers. I forgot which way to turn the nuts via which way it pulls but you should be able to get it. That is what my sales guy told me to do if I had a problem....cant say i have had the problem yet do to theres only 80hrs on my machine.
     

Share This Page