Hey guys just wanted to post some pictures of the striper kit I made for my Bobcat Z. I had seen they made a roller kit for the deck but they want 350.00!! Ta hell with that so I built my own pretty much the exact same thing but better IMO. I tried the 3 inch pvc with sand, chains, conveyor belt on the back of the deck, and now this roller. I mowed my yard last night to test and wow I was impressed. Its just a 2 inch solid round bar 36 inches long, it weighs right at 31 pounds. I welded two 3/8's bolts to the end of the round bar, then made two 7 inch long brackets for the side. The bobcat deck had two smaller holes already there so I drilled them to 3/8's and bolted it right on. I welded the two smaller 3/8's bolts to the deck as a stop so it can't fold under the deck, and when the deck it raised full height the roller is off the ground, for loading unloading etc. Anyways heres some pictures let me know what ya think. Thanks!