another toro hydro problem

Discussion in 'Mechanic and Repair' started by Gianninilandscaping, Aug 14, 2011.

  1. Gianninilandscaping

    Gianninilandscaping LawnSite Member
    Posts: 53

    I just rebuilt the pump on my toro hoping that it would solve the chatter problem but now i have back pressure in the tank and oil is shooting out of the cap on the hydro tank...


    anyone have this problem before?
     
  2. MoGreen

    MoGreen LawnSite Member
    Posts: 88

    What brand pump is it? I have asked a few times about Eaton 778 hydro pump rebuilding and haven't gotten many responses here. Where did you find your internal parts for it?
    Good luck with your repair though!!
     
  3. piston slapper

    piston slapper LawnSite Platinum Member
    Posts: 4,246

    Sounds like you overfilled the tank.
     
  4. Gianninilandscaping

    Gianninilandscaping LawnSite Member
    Posts: 53

    i didnt put any new internals in it.... i just put new seals and o-rings in it
     
  5. Gianninilandscaping

    Gianninilandscaping LawnSite Member
    Posts: 53

    i filled it to the middle of the lower and higher baffel
     
  6. ricky86

    ricky86 LawnSite Bronze Member
    Posts: 1,852

    Did you 1) Pre-fill the pump before attempting to start. All that air has to go somewhere. 2) Switch the suction and return hoses by chance. Some you can, most you can't. With no numbers, nobody really knows what your working on.
     

Share This Page