anyone using a Kubota W5021 walk behind mower?

Discussion in 'Lawn Mowing' started by _CY_, Mar 27, 2009.

  1. cs9530

    cs9530 LawnSite Member
    Posts: 12

    Are you looking for the owners manual or the shop manual? I bought the shop manual years ago – it’s in paper. Is there anything in particular you’re looking for? I could email/post scanned pages.
     
  2. stevehunter

    stevehunter LawnSite Member
    Posts: 3

    I am looking for the shop manual. If its not to much to ask. I was looking for a parts list / break down or anything you could send me would be great. Thank you
     
  3. erobinson32

    erobinson32 LawnSite Member
    Posts: 16

  4. cs9530

    cs9530 LawnSite Member
    Posts: 12

    I will take a look tonight. Its been a while since I looked through it bit I remember following pictorial on valve adjustment. The first page of this thread has links to a great parts site. I believe they have some parts breakdowns.

    I'll see what the shop manual has in it.
    Posted via Mobile Device
     
  5. cs9530

    cs9530 LawnSite Member
    Posts: 12

    I dug out the manual tonight. It's really more procedural/specification oriented. Their are parts blowups but they're split up by mechanism.

    The strength of the manual is that it gives procedures for disassembly, torque specs, etc.

    I scanned the first few pages including the TOC. If there's a specific section you need, I'm more than happy to scan and post...just let me know.
     

    Attached Files:

  6. tjski

    tjski LawnSite Member
    Posts: 16

    cs9530 could you scan the pages that give the specs on the head bolt torque values. I'm replacing the head and any pages that pertain to the removal and installation of the head would be great.

    Thanks Todd
     
  7. stevehunter

    stevehunter LawnSite Member
    Posts: 3

    If its not to much to ask could you scan the engine, transmission, and the troubleshooting sections? I would really appreciate it. No hurry if you are busy. Thanks again







     
  8. cs9530

    cs9530 LawnSite Member
    Posts: 12

    I scanned the Disassembling and Reassembling sections of the Engine chapter. I didn't do the Servicing section but if you need it, let me know. It basically covers checking the serviceability (tolerances) of the main engine parts.

    Another note - the manual is in three languages - I copied only English which is why the pages skip.

    I'll get the transmission section uploaded shortly.

    Chris
     

    Attached Files:

  9. cs9530

    cs9530 LawnSite Member
    Posts: 12

    Here are the Transmission and Troubleshooting sections.
     

    Attached Files:

  10. auslk

    auslk LawnSite Member
    Posts: 1

    Has anybody came up with a better way to drain the oil from the mower, rather than tipping the mower up on 2 wheels and removing the drain plug? I always get oil all over the deck when I try this. We need some kind of drain connection extension with an inline valve and hose barb for tubing to attach to.
     

Share This Page