1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice


Discussion in 'Eureka Fluid Film' started by JRhustle, Feb 23, 2009.

  1. JRhustle

    JRhustle LawnSite Member
    Posts: 5

    How are u applying the non-aerosol version?



    DLAWNS LawnSite Fanatic
    Posts: 5,778

    I wonder if a pump sprayer would work. That would be very convenient. It might be too thick, though. I know people have posted the link to a gun that gets hooked to a compressor I believe.
  3. Dano50

    Dano50 LawnSite Bronze Member
    Posts: 1,781

    Dang, I'm not sure how I missed this thread.

    When dealing with Fluid Film in bulk, you want to treat it like you would a paint, since it is about the same viscosity. You could either brush or roll it on, use an airless paint sprayer, such as a Wagner, or an undercoating gun.
  4. JRhustle

    JRhustle LawnSite Member
    Posts: 5


    Like DLawns said, I was thinking about using a pump sprayer or even a spray bottle. :hammerhead: Didn't realize it was that thick.

Share This Page