Aux Hydro Release? Tl130

Discussion in 'Heavy Equipment & Pavement' started by pagreen, Dec 1, 2012.

  1. pagreen

    pagreen LawnSite Member
    Posts: 61

    I just picked up a 06 Tl130 and dont know how to release the pressure for the aux hydro? i tried searching it but couldnt find any info...Thanks in advance...
     
  2. bobcat_ron

    bobcat_ron LawnSite Fanatic
    Posts: 10,089

    Turn the ignition on and look for a yellow button on the left beside the seat, push it down and push thw aux buttons and couple the hoses, that yellow button turns on the 1 way flow to the tank, so any back pressure will disperse. The green one is the detent for 1 or 2 way flow.
    There is also a purple button which will return you back home through the rabbit hole. I would not advise pushing that button.
    Instead, take the red pill.
    Posted via Mobile Device
     
  3. Digdeep

    Digdeep LawnSite Bronze Member
    Posts: 1,840

    But whatever you do...DON'T CUT THE YELLOW WIRE!
    Posted via Mobile Device
     
  4. bobcat_ron

    bobcat_ron LawnSite Fanatic
    Posts: 10,089

    Correct, the yellow wire will turn that magnificent creation of Japanese engineering into a dribbling jiggling pile of Bobcat crap.
    Posted via Mobile Device
     

Share This Page