1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Bedshaper problem

Discussion in 'Landscape Architecture and Design' started by wmcrum6, May 10, 2006.

  1. wmcrum6

    wmcrum6 LawnSite Member
    from NE Ohio
    Posts: 12

    I just purchased a second hand Bedshaper by little wonder. The machine works great and makes a great cut.(on flat ground) But, when the blade is in the "up" position, as it would be for transport, the machine barely creeps along. It doesn't have enough umph to climb the ramps of my trailer, let alone climb a hill. Since the unit is second hand, I don't have an operators manuel and I am not ready to pay for a service call. Has anyone experienced this problem? Are there adjustments that can be made so that this thing can be loaded easily on my trailer. It must weigh 400 lbs.
  2. thomcat88

    thomcat88 LawnSite Member
    Posts: 5

    (I don't have an operators manuel)

    Look up the operators manuel on-line, you will be able to find something!
  3. Mow Better

    Mow Better LawnSite Member
    Posts: 2

Share This Page