Belt length?

Discussion in 'Hustler Turf Equip (Archived)' started by Mickhippy, Feb 4, 2006.

  1. Mickhippy

    Mickhippy LawnSite Platinum Member
    Posts: 4,257

    Pj, can you tell me the length of the deck drive belt for a 28/60 Super Z, Model # 927053.

    Part number I think is 781310. Correct me if Im wrong please mate!
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    All I have is part #'s, I don't have the specs on the belt.
    I will ask around and see what I can get for you.

    Pj
     
  3. Mickhippy

    Mickhippy LawnSite Platinum Member
    Posts: 4,257

    Thanks mate!
     
  4. Mickhippy

    Mickhippy LawnSite Platinum Member
    Posts: 4,257

    Pj, have you had a chance to look into it for me yet? I need to know fairly quickly so I can make orders!

    Cheers buddy!
     
  5. Downunder Bob

    Downunder Bob LawnSite Member
    Posts: 112

    Hey Mick, I see youÂ’re chasing an aftermarket belt. Let us know how you get on, cause when I looked into it I was told "the company doesn't make Power Belts that big". "They were too long" and that was on a 52 mini-z, yours could be longer.
    I used to get the transmission belt made for the JD, but that one was a lot shorter.
    So if you do any good let us know cause they could be a lot cheaper.
     
  6. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    I will ask again, I have not heard anything yet.

    Pj
     
  7. Mickhippy

    Mickhippy LawnSite Platinum Member
    Posts: 4,257

    Thanks again Pj!

    Bob, yep, could save $100/belt if all works out! $160 for a belt is a dead set rip off when other belts are $50 or $60!

    Im on my 2nd belt in under 250 hrs! First went in 85hrs! NOT HAPPY about that!
     
  8. mike28nc

    mike28nc LawnSite Member
    Posts: 71


    cant you just measure the one you have on the mower. I know auto zone has a device that will measure belts even if they are broken.

    Mike
     
  9. Mickhippy

    Mickhippy LawnSite Platinum Member
    Posts: 4,257

    I saw one of those things at the shop the other day. But not sure if it can go out to 175" or what ever? Looked pretty small!

    Good thought though, cheers!
     

Share This Page