best wrench for oil change

Discussion in 'eXmark' started by vandrv, Mar 4, 2004.

  1. vandrv

    vandrv LawnSite Member
    Posts: 9

    I have a lazer Z HP with a 20 hp Kohler motor. I ahve yet to find a good rench to loosen the oil valve There is no shot of using a socket and very little turning room for a box wrench. Was just wondering if anyone has found a good solution for this. Thanks
     
  2. eXmark

    eXmark Manufacturer / Sponsor
    Posts: 4,258

    Vandry,

    That's a tough one to get at for sure. I found that using a 10 mm socket with extension I can get at it pretty easy.

    It's been a while but as I recall you must slide the socket and extension under the hydro hoses and onto the valve. Then attach you rachet.

    Thanks,

    Terry
     

Share This Page