Blade blocker (OCDC) with bagging setup???

Discussion in 'Lawn Mowing' started by G.M.Landscaping, Mar 12, 2006.

  1. G.M.Landscaping

    G.M.Landscaping LawnSite Senior Member
    Posts: 937

    I'm thinking of building one for a WB with the side plate for the bag still mounted so you can still bag if needed.
    Has anyone done this yet for some ideas before I start?
    Not sure if I want a sliding version or a flap design.
     
  2. macaw

    macaw LawnSite Senior Member
    Posts: 415

    I got a advance cute from http://www.meg-mo.com/ it is on a Scag 52" wb
    I mounted it about 1" off the deck so the bagging plate slides under it and drilled 2 holes in the cute mounting plate to bolt the bagging plate to takes less than 5
    min. to put on works good just used it yesterday.
     
  3. G.M.Landscaping

    G.M.Landscaping LawnSite Senior Member
    Posts: 937

    Started on building one today. Hopfully I'll have some time to finish it tommorow and posts some pics.
     
  4. G.M.Landscaping

    G.M.Landscaping LawnSite Senior Member
    Posts: 937

    Not much response here but here they are. It needs a spring on the flap to make it work better. It opens fully and closes fully.
    IM001453 (Medium).JPG

    IM001454 (Medium).JPG

    IM001450 (Medium).JPG

    IM001453 (Medium).JPG

    IM001454 (Medium).JPG

    IM001450 (Medium).JPG
     
  5. Mr Ricochet

    Mr Ricochet LawnSite Member
    Posts: 39

    Looks nice GM. How's it working out for you?
     
  6. G.M.Landscaping

    G.M.Landscaping LawnSite Senior Member
    Posts: 937

    It works out better than I hoped for. I made some changes to it since the original post to make it work better.
     

Share This Page