Blade reference

Discussion in 'Hustler Turf Equip (Archived)' started by mowerconsultant, Nov 11, 2004.

Thread Status:
Not open for further replies.
  1. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Attached is a blade reference chart.
    You can look up your blade part #'s here.
    There are 4 pages of charts, 2 current production and 2 non current production.
    If you have any questions feel free to ask here in this thread.
    UPDATE 11/22/05
    In the next post you will find the CURRENT list of blades on current production units.
    Please check your serial #'s to verify you are getting the correct blade on your full frame 52" / 60" 72", Hustler Z / Super Z.


    Pj
     

    Attached Files:

  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    UPDATE 11/22/05

    The attached blade chart shows a list of all flat blades used on current production decks as well as optional blades that are available.
    The following list shows when flat blades were first used on the Hustler Z and Super Z mowers. Also note on the following list, fusion blades were introduced in production on commercial units only.
    Any Hustler Z or Super Z units with 52” decks beginning with serial number 05020101
    Any Hustler Z or Super Z units with 60” decks beginning with serial number 05011098
    Any Hustler Z or Super Z units with 72” decks beginning with serial number 05020206
    For your convenience the attached blade chart also shows the blades that are available for the Mini Z,
    Super Mini Z, FasTrak, Mini FasTrak, Hustler Hydro WalkBehind, TrimStar Hydro WalkBehind, and
    TrimStar Geardrive WalkBehind decks. Keep in mind that these units have always used flat blades.

    [​IMG]
    [​IMG]
    [​IMG]
     
  3. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    Added a few more deck sizes today.
     
Thread Status:
Not open for further replies.

Share This Page