Blades for 60" SD

Discussion in 'Hustler Turf Equip (Archived)' started by Gjohnson, Jul 11, 2009.

  1. Gjohnson

    Gjohnson LawnSite Member
    from La.
    Posts: 20

    When I bought my 60" SD around May of '08. I got an extra set of blades. Well, when I started to change the blades, the ones the dealer gave me were about 1/4" to long at the end or 1/2" overall. They would not clear the side of the deck when I tried to install them. I took them back and he said that the book shows that blade to be correct. He said my mower must have the XR7 deck and I got the blades for that, which are the correct length. Whats up with that?
    Thanks,
    Guy
     
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    60" SD?
    What is your model and serial #?
    By SD do you mean FasTrak Super Duty 60"? or 60" side discharge on a Hustler Z or Super Z?
    If its the Z or Super Z the blade lengths changed in 2006 with the introduction of the XR-7 decks.
    This may be your problem.
    Let me know what you have and I will make sure you have the right blade part #'s.

    Pj
     
  3. Gjohnson

    Gjohnson LawnSite Member
    from La.
    Posts: 20

    It is the FasTrak Super Duty, 60" cut, side discharge, 25 HP KAW. I'll have to look up the ser. # tomorrow if you still need it.
    Thanks
     
  4. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    I dont need the serial # for the Super Duty.
    The part # blade that you need is 794685.
    It is the same blade used on the 60" XR-7 deck.

    Pj
     

Share This Page