blew out a spindle bearing on the toro 62"

Discussion in 'Lawn Mowing' started by The mayor, Nov 3, 2006.

  1. The mayor

    The mayor LawnSite Senior Member
    Posts: 592

    Last lawn on the season to mow and the bearing on the toro 62" went bad. Do I have to get special bearings for this mower or will the local auto parts store carry what I am looking for. They look like common taper bearings.
     
  2. WildWest

    WildWest LawnSite Senior Member
    Posts: 384

    There should be a number on the bearing, if they cant match it up, they should be able to order it for you. NAPA auto would probably be your best bet.

    You should be able to go to "Miller Bearing.com" and find a "local dealer" that can help you out too!
     
  3. lawnspecialties

    lawnspecialties LawnSite Silver Member
    Posts: 2,513

    Let me guess.....the middle spindle. If so, a common issue with Toro's. :confused:
     
  4. The mayor

    The mayor LawnSite Senior Member
    Posts: 592

    Turned out to be a side bearing:) . I did see some numbers on the bearing. I will run down to napa and get a match. I was hoping that it wasn't going to be some funky high speed special bearing that you you only could get from toro. Thanks for all the help.
     

Share This Page