Blowout on a 48" WB

Discussion in 'LESCO' started by bretben55, Aug 17, 2005.

  1. bretben55

    bretben55 LawnSite Member
    Posts: 36

    I have my fixed deck mower bolted to the frame on the upper holes. I have the bushings set up everywhere according to the manual, so I cut at 3.5".

    I am running double blades on the machine and get a lot of blowout from under the front of the deck.

    Is there a better setup to gid rid of the blowout?
     
  2. mow king

    mow king LawnSite Senior Member
    Posts: 571

    Lose the double blades and the blowout will subside.
     
  3. MrFikit

    MrFikit LawnSite Member
    Posts: 28

    Check out kit number 708512 if your unit is 2002 or older. It's a baffle kit which bolts on and should eliminate the problem.
     

Share This Page