Bobcat 643

Discussion in 'Heavy Equipment & Pavement' started by CBlandscaping, Jun 19, 2006.

  1. CBlandscaping

    CBlandscaping LawnSite Member
    from CT
    Posts: 48

    I have a Bobcat 643 that was just lent to me and will be at my use when ever I need it so i was going to do some much needed TLC to it. I was wondering what i should do about the fact that both of the quick connect lever systems are broken, one side of the bucket has like a tractor pin holding it on and the other has the normal pin wedged in. THe machine works great but because of this problem there is alot of slop in the bucket any suggestions on what to do?
     
  2. pondfishr

    pondfishr LawnSite Member
    Posts: 115

    Go to http://www.skidsteerforum.com and visit the skidsteers forum. See if you can get Tazza to respond. He is from Australia and is an expert when it comes to Bobcat service and maintenance.:waving:
     
  3. pondfishr

    pondfishr LawnSite Member
    Posts: 115

  4. xcopterdoc

    xcopterdoc LawnSite Senior Member
    Posts: 752

    Not much you can do,... you either rig it or you go to your dealer and buy the handle kits to replace them. I think they are about a 100 bucks give or take, per side.
     

Share This Page