Bobcat Fastcat Pro 61 deck belt size?

Discussion in 'Mechanic and Repair' started by HenryB, Aug 5, 2011.

  1. HenryB

    HenryB LawnSite Bronze Member
    Posts: 1,828

    Trying to figure out the length of the main deck to engine belt. It's long because it's a single belt instead of two. Anyone know the size? Thanks in advance.
     
  2. pugs

    pugs LawnSite Gold Member
    Posts: 3,023

    Go to Bobcat and get 4163569
     
  3. dutch1

    dutch1 LawnSite Silver Member
    from Jayhawk
    Posts: 2,231

    Just a stab in the dark. Can you make out the OEM number on the belt? My Gate book states that it should be #2188128. If that should be the case, the Gates number 6530BR and it is a 65 3/8" belt. Check with NAPA as they handle Gates products.
     
  4. HenryB

    HenryB LawnSite Bronze Member
    Posts: 1,828

    Someone suggested a "154" in belt. That's big.
     
  5. pugs

    pugs LawnSite Gold Member
    Posts: 3,023

    Thats also why you will most likely end up with a belt that says CGC or SGC on it. Knowing the length is pointless since most belt manufacturers make belts every inch up to about 100 or 115 inches. After that they start skipping every 3-5 inches. And that only goes to about 130 if that. So you could refer to my previous post and get the machine cutting grass again, or you can continue a silly quest to find an aftermarket belt that probably doesnt exist and wont save you anything anyway.

    List price on the bobcat belt is 87.17.
     
  6. HenryB

    HenryB LawnSite Bronze Member
    Posts: 1,828

    No silly quest. Machines not down. I just wanted to keep an extra. I always do. My dealer wanted over $100 for the belt. So should I be dealer loyal?
     
  7. pugs

    pugs LawnSite Gold Member
    Posts: 3,023

    I cant answer that, but just saying you are going to most likely have to get the belt from some Bobcat source, whether it be your dealer or another dealer or someplace that sells Bobcat parts online. There probably is no alternative to the genuine Bobcat belt at this time.
     

Share This Page