Bobcat X-Change System question?

Discussion in 'Heavy Equipment & Pavement' started by WC46, Aug 20, 2005.

  1. WC46

    WC46 LawnSite Member
    Posts: 20

    I would like to switch my 331 to the x-change system but I don't want to go out and buy all new buckets. Mine are the pin on. Does bobcat sell a weld on x-change plate to match the x-change system?
     
  2. UNISCAPER

    UNISCAPER LawnSite Bronze Member
    Posts: 1,426

    I just spoke with a rental store we use when we need things about this...little by little he is switching his fleet of 100 bobcats over to 1/2 Cat, 1/2 bobcat, and yes, he is ordering the brackets from Bobcat and retro fitting the older hook ups with newer style...What a dumb thing for Bobcat to have done.
     
  3. Scag48

    Scag48 LawnSite Fanatic
    Posts: 6,067

    Yes, pin on buckets/pin grabber couplers are the only way to go, especially if you prefer one brand of bucket and another brand of hammer, hoe pac, etc. and have to run both on the same machine.
     

Share This Page