bobcat'nstl's work pics

Discussion in 'Heavy Equipment & Pavement' started by Bobcat'nSTL, Jul 4, 2009.

  1. MattnSTL

    MattnSTL LawnSite Member
    Posts: 90

    March 27, 2010:

    The shoveling never ends.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    And another finished floor.
    [​IMG]
     
  2. KrayzKajun

    KrayzKajun LawnSite Fanatic
    Posts: 10,742

    looks like funn!!
     
  3. MattnSTL

    MattnSTL LawnSite Member
    Posts: 90

    April 3, 2010:

    [​IMG]

    [​IMG]

    We made an island.
    [​IMG]

    Cooking lunch.
    [​IMG]

    We had to wedge in a new 2x12 for the stairs. A joist in the middle of two others had rotted out with the outer two still good.
    [​IMG]

    The basement ceiling was being held up by a pipe which trapped all the debris. Took forever to beat it down. You could actually stand on a pile of plaster held up by the pipes.
    [​IMG]

    The last step is a doozy.
    [​IMG]

    Water heater that had somehow not fallen through the second floor.
    [​IMG]

    New front entrance to catch anyone we don't want in the house.
    [​IMG]

    Water heater was unfortunately still full.
    [​IMG]

    And the almost finished product.
    [​IMG]

    Evening views.
    [​IMG]

    [​IMG]
     
  4. MattnSTL

    MattnSTL LawnSite Member
    Posts: 90

    April 17, 2010:

    Finishing up the last of the first floor.
    [​IMG]

    Scaffolding inside to get to the second floor.
    [​IMG]

    Trying to get the medallion down. My brother broke part of it, but we got it mostly intact.
    [​IMG]

    [​IMG]

    [​IMG]

    Wrecking the kitchen ceiling.
    [​IMG]

    [​IMG]

    And the pile of debris.
    [​IMG]
     
  5. MattnSTL

    MattnSTL LawnSite Member
    Posts: 90

    April 24, 2010:

    Had to cut apart a big steel sink and cabinet.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Give me dirt anytime. Shoveling this stuff sucks.
    [​IMG]

    Doing a little golfing with plaster.
    [​IMG]

    Burning more wood. Got another 40 yard dumpster coming this weekend to load the pile up.
    [​IMG]

    Masons scaffolding.
    [​IMG]

    This is right about the point the tornado sirens went off and we ran out of there as quick as we could.
    [​IMG]

    The results of the storm. No tornado where we were, but there were some weak ones nearby.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    I bet you want a stoplight too. No, it did not come with the house.
    [​IMG]

    Just a little water inside from the storm.
    [​IMG]

    Did a little equipment hunting. The new I-70 Mississippi River Bridge is being built a few block from my house. Manitowoc 777.
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
    Last edited: Apr 27, 2010
  6. AEL

    AEL LawnSite Bronze Member
    Posts: 1,724

    Is that a makita quick cut saw i spotted? How do you guys like it? Looks very similar to the Husqavarna ones...

    Jobs looks great. Whats your time line for it?
     
  7. Hollowellreid

    Hollowellreid LawnSite Senior Member
    Posts: 290

    We have a makita 12" diamond saw which I believe is the same as a Dolmar?

    I actually like it over the Stihl's we have. I feel like the Stihl has been set up for a left handed user. The pull start is on the outside for me, and the air intake is on the inside. It likes to suck my pant legs into it and such.

    Good saw, runs strong, air filter assembly is easy to clean, bigger fuel tank than the stihl it seems by far, good power. I like it.
     
  8. Bobcat'nSTL

    Bobcat'nSTL LawnSite Member
    Posts: 149

  9. MattnSTL

    MattnSTL LawnSite Member
    Posts: 90

    To answer the question about the saw that I never got around to, yes it is a 14" Makita. It was a great saw until we got a scored cylinder this summer cutting a floor and it won't hold compression now. We got a 14" Stihl as the replacement. The timeline for the project is pretty open ended. In the multiple year range at least.

    It's been a few months since any pics got posted. Some of this will be from my house project. Others are from some work we did this summer in between a lot of other stuff.

    May 2, 2010
    [​IMG]
    Picking up the bobcat to load a roll-off dumpster.

    [​IMG]


    [​IMG]
    Another 40 yard roll-off.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    How do you get grease all over your back?
     
  10. MattnSTL

    MattnSTL LawnSite Member
    Posts: 90

    May 16, 2010

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     

Share This Page