Bought the badboy mz today!

Discussion in 'Homeowner Assistance Forum' started by Pooswa, Mar 9, 2012.

  1. Pooswa

    Pooswa LawnSite Member
    Posts: 66

    Is online the best place to get the fusion blades? Does anybody know part number of the blades for the 42 inch mz....dont need any yet but would like to have them on hand ..especially after I try to sharpen my blades for first time..
  2. retrodog

    retrodog LawnSite Silver Member
    Posts: 2,421

    038-4221 is the number stamped on the blade. There is a dixon blade that crosses over that has a 5/8 hole, but cant member the part number...
  3. Pooswa

    Pooswa LawnSite Member
    Posts: 66

    Just a update on my experience with my mower..still loving it...No problems or any major things that bug me about it....

    I also bought the mojack easy lift for cleaning it and when I do have to take off the blades... it is a well built lift and easy to use....

    Last time I cleaned it I noticed that the paint inside the deck was starting to rub off I was thinking of using some bedliner that I have and paint the inside of my deck? Does anybody think this is worth the time to do or see any problem with doing this?
  4. Capemay Eagle

    Capemay Eagle LawnSite Bronze Member
    Posts: 1,750

    I have never heard of that, but some people use a paint brush and some oil or you can spray some fluid film.

    MS_SURVEYOR LawnSite Bronze Member
    Posts: 1,002

    I did that years ago on my Sabre LT. Wore it off like sand blasting. Didn't last long at all. Fluid Film does fairly good. Keeps the buildup from sticking, and the rust down. No kind of coating is going to last long.
  6. BINKY1902

    BINKY1902 LawnSite Bronze Member
    from South
    Posts: 1,123

    Even a powercoat will wear off over time, so really there is no way to keep paint under there.
  7. Pooswa

    Pooswa LawnSite Member
    Posts: 66

    I have been looking for a online place to buy parts for my mower(blades, belts, etc.. Mainly due to not having to take the 30 minute (one way) drive to the dealer where I bought my mower..I found one with what seems to me reasonable prices and shipping I placed a order today and will post here if I have any problems...I don't know if it's allowed to post websites on here but if anybody interested they can send me a pm
  8. Pooswa

    Pooswa LawnSite Member
    Posts: 66

    Got the order I placed online...everything was packed nice and tight...

    Also does anybody know where there is a good online tutorial on sharpening blades?
  9. saw n mow

    saw n mow LawnSite Senior Member
    Posts: 273

    Pooswa, did you ever get my PM?
  10. Pooswa

    Pooswa LawnSite Member
    Posts: 66

    Sorry saw n mow didn't notice it ...but now I have sent you a reply back to your pm..

Share This Page