Bri-mar 6x12 low profile

Discussion in 'Trucks and Trailers' started by Newguy25, May 23, 2007.

  1. Newguy25

    Newguy25 LawnSite Member
    Posts: 120

    Looking at getting this trailer with the 5ft landscape gate. Will the gate hold up to a skid steer being loaded and unloaded?? Will a skid steer even fit in?? I know it will be tight but will it work??? I was looking for a 14 ft with a landscape gate but could not find one?? :usflag:
     
  2. grassmanak

    grassmanak LawnSite Senior Member
    Posts: 792

    it should, just make sure the gate is built well and also has support braces where the tires will run up and down. Most manufactures will tell you what the gate will hold.
     
  3. bobcatnj

    bobcatnj LawnSite Senior Member
    Posts: 687

    i have a 7 x 14 dump with ramps. they are saying it can carry a skid steer. i have not tried it yet but will in a couple of weeks for a job coming up. a f250 should be able to carry the weight? i hope
     
  4. Newguy25

    Newguy25 LawnSite Member
    Posts: 120

    If you look at the website you can see what the landscape gate looks like. I dunno...its gonna be a tight fit and I might be better off getting ramps. Depending on what size skid steer the 250 might be over its weight limit depending on the combo weight of the trailer and skid steer. Freakin hot in NY today 90 degrees!!!:drinkup:
     
  5. LawnScapers of Dayton

    LawnScapers of Dayton LawnSite Silver Member
    Male, from Dayton, OH
    Posts: 2,571

    I have the 6x12 Brimar with the 5ft landscape gate........by no means can you load a Bobcat on that gate. I bent it loading a Dingo type machine...... get the ramps......

    this is mine.....

    http://www.lawnsite.com/showthread.php?t=173100
     

Share This Page