Briggs 6.5 Intek Problems

Discussion in 'Mechanic and Repair' started by 2001john, Sep 26, 2004.

  1. 2001john

    2001john LawnSite Member
    Posts: 23

    Could anyone tell me if the briggs 6.5 hp engine has any bad faults and is it suited for commercial mowing ?
     
  2. procut

    procut LawnSite Bronze Member
    Posts: 1,853

    I have this engine on a chipper shreader vac, and have had no problems thus far.
     
  3. Travis Followell

    Travis Followell LawnSite Silver Member
    from KY
    Posts: 2,207

    I have a 5.5 hp intek on a tiller and it is definately a good engine. It has no faults whatsoever.
     
  4. Georgeharry

    Georgeharry LawnSite Member
    Posts: 38

    Does the intec have a cast iron cylinder?Thanks
     
  5. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024


    Yes, The Intek line does have the cast iron cylinder bore.

    I have a couple commercial guy's using W/B blowers with the Intek and have had no major problems with them. They are a good engine if maintenance is performed properly as with any engine.
     
  6. Georgeharry

    Georgeharry LawnSite Member
    Posts: 38

    Thanks again Restrorob.
     

Share This Page