Briggs engine carb kit

Discussion in 'Mechanic and Repair' started by Dixie Bluegrass, Dec 4, 2012.

  1. Dixie Bluegrass

    Dixie Bluegrass LawnSite Member
    Posts: 64

    Hey guys,
    Got a leaf shredder with a newer briggs and straton replacement engine. It 10 hp and it is electric start. Here are the numbers:
    Model Type. Code
    221437 5045 01 9408111A

    I am looking for an engine carb rebuild kit number. The engine has been sitting for years and the carb is now leaking. Engine runs great though.
    Thanks for your help.
     
  2. BigFish

    BigFish LawnSite Silver Member
    Posts: 2,919

    Go to the B&S website and put your numbers in to get an IPL. It will have the carb kit/s listed/
    I was gonna link to it but it was sloow to load.

    Or punch your numbers in at any of the vendors sites that sponser this forum.
     
  3. JimQ

    JimQ LawnSite Bronze Member
    Posts: 1,139

    Nice thing about those carbs is there really isn't many soft parts that ever need to be replaced.

    If it's leaking fuel you'll probably just need a 394683 Needle (it's rubber tipped). There is the off chance that the float has fuel in it. 692265 Float.

    Only 2 other parts you might need.

    691610 is a washer that goes under the high speed needle jet
    692215 is the carb body gasket

    Before you try to open the carb you'll need to remove the high speed needle assembly from the bottom, then unscrew the main nozzle from the same hole.

    Q
     
  4. newz7151

    newz7151 LawnSite Silver Member
    from Tejas
    Posts: 2,419

    "Newer" ? It's 18 years old..... What the heck was on it before?
     

Share This Page