Briggs flywheel Pulling Tool

Discussion in 'Mechanic and Repair' started by hotrodsnapper, Aug 16, 2007.

  1. hotrodsnapper

    hotrodsnapper LawnSite Member
    Posts: 85

    I have been wrestling with the flywheel on a 280707 briggs single. I got the nut off pretty easily but I have not been able to get the flywheel off the crank. Is there a tool that I can find at an auto parts store that will get the flywheel off? It looks like a harmonic balancer puller would work using long bolts into the flywheel.

    Does anyone have any other tricks that might save me a trip?
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,024

    I could tell you the old school way but that is not recommended. I have been using a steering wheel puller for years, Most chain auto stores have these as a loner tool.

    Also, If you sprayed penetrating oil on there clean the crank and flywheel with carb & choke cleaner before re-assembly. You don't want anything on these surfaces.
     
  3. hotrodsnapper

    hotrodsnapper LawnSite Member
    Posts: 85

    Thanks as always Rob.

    I'll swing by the parts store tonight and take out a steering wheel puller.
     

Share This Page