Briggs lawn mower

Discussion in 'Mechanic and Repair' started by adameid, Dec 2, 2006.

  1. adameid

    adameid LawnSite Member
    from sydney
    Posts: 16

    Hi,
    I have a briggs mower 12F802-1160-02.96073058. It wouldnt start so I dismantled it. I found the magnetic flywheel rusty so I sanded and also cleaned the carbby at the same time.

    Mower started first go but now I have no speed control. Its either off or full speed no inbetween. There was one spring which have to remove. I installed as per pic attached is that the correct way??

    What are the possible causes of this??

    Thanks in advance

    DSC01035.JPG
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

    Do As Below......

    Briggs Throttle link.jpg
     
  3. adameid

    adameid LawnSite Member
    from sydney
    Posts: 16

    Thanks for that Restrorob. I apprecite your help.
    I will do it first thing tommorrow morning
    :)
     
  4. adameid

    adameid LawnSite Member
    from sydney
    Posts: 16

    Restrorob thanks again. I started it today and is works like a new one.
    Do you know where I can get an repair manual for briggs mower?
     
  5. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

  6. pugs

    pugs LawnSite Gold Member
    Posts: 3,022

    Yah, thepowerportal leaves a bit to be desired. They need to get with Kohler and help Kohler fix thier site while Kohler helps them with theirs...LOL
     

Share This Page