brimar dump

Discussion in 'Trucks and Trailers' started by Coastal Lawn Maintenance, Jun 11, 2010.

  1. Coastal Lawn Maintenance

    Coastal Lawn Maintenance LawnSite Senior Member
    from VA
    Posts: 485

    I picked up my new dump about 2 weeks ago and everything has been going good with it until i tried to get the ramps out from underneath. the latches that hold the ramps in feel like they are to tight and not allowing it to come out far enough for them to spin out of the way. i have even tried a pry bar to it and they still almost make it out and then max out the spring. the dealer is gone for the weekend so i turned to lawn site any help would be appreciative
     
  2. jwsland

    jwsland LawnSite Member
    Posts: 233

    I had the same problem when i first got mine. I just dealt with it and they eventually eased up. I had to use two hands to get them out. I never looked underneath to see if they can be adjusted or greased. that may help.
     
  3. Coastal Lawn Maintenance

    Coastal Lawn Maintenance LawnSite Senior Member
    from VA
    Posts: 485

    i took and cut 2 rounds of the spring to make it a bit easier but still say tight
     

Share This Page