Brought home a new project!

Discussion in 'Original Pictures Forum' started by KrayzKajun, Aug 11, 2007.

  1. KrayzKajun

    KrayzKajun LawnSite Fanatic
    Posts: 10,742

    1994 Chevy Camaro, its gutted, no motor or transmision. (my new Drag car project)
    I have way too many toys!!:laugh: :laugh:

    I know my truck was sagin!!!
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. ke5hbd

    ke5hbd LawnSite Member
    Posts: 97

    Nice car. Are you going basck with an LS series engine? Like your Truck and Shop also. Very clean which shows pride.

    Do you 1/4 or 1/8th mile race?
     
  3. KrayzKajun

    KrayzKajun LawnSite Fanatic
    Posts: 10,742

    HOPING FOR A 10SEC 1/4 mile when its done. Prolly go with a big block, i have a 454 block layin on the floor in my shop!
     
  4. ke5hbd

    ke5hbd LawnSite Member
    Posts: 97

    454. You can make 480 cubic inches easily.
     
  5. kbrashears

    kbrashears LawnSite Senior Member
    Posts: 763

    That truck wouldn't sag so bad if you'd put the trailer load over the axles.
     
  6. HazellLawnCare

    HazellLawnCare LawnSite Senior Member
    Posts: 832

    Better put a good cage in it. The T top cars can flex ALOT if they have any power.
     
  7. FearThisDeere

    FearThisDeere LawnSite Bronze Member
    Posts: 1,168

    Looks like a nice clean car for a base. Good luck. Keep us up to date with some project pics!
     
  8. KrayzKajun

    KrayzKajun LawnSite Fanatic
    Posts: 10,742

    I started tearing it down over the weekend. I get some pics once i start welding the cage in!
     

Share This Page