Building me a toolbox for my trailer...

Discussion in 'Trucks and Trailers' started by BROWNS LAWN CARE, Aug 27, 2012.

  1. BROWNS LAWN CARE

    BROWNS LAWN CARE LawnSite Senior Member
    Posts: 615

    i don't have a welder, yet , and can't afford one, yet...

    but i did have some 3/4 plywood laying around and some black paint...

    this thing will be temporary, as in probably a year at least. i wanna go metal after i buy that welder...

    anyway, let's begin...

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]


    i got 1 coat of black paint, then realized after putting my saws away i forgot to cut the lid at a pivot point :D


    oh well, i will catch that tomorrow after mowing...

    :waving:
     
  2. alldayrj

    alldayrj LawnSite Gold Member
    Posts: 3,768

    Is that pressure treat ply?
    Posted via Mobile Device
     
  3. BROWNS LAWN CARE

    BROWNS LAWN CARE LawnSite Senior Member
    Posts: 615

    no it is not, but the life expectancy on this thing is only a year or so...

    it will be painted and sealed on the inside with some of that expanding foam, then touched up with paint. and on the bottom side i am considering some type of plastic spray coating...
     
  4. BROWNS LAWN CARE

    BROWNS LAWN CARE LawnSite Senior Member
    Posts: 615

  5. TriCityLawnCareLLC

    TriCityLawnCareLLC LawnSite Bronze Member
    from Ohio
    Posts: 1,025

  6. BROWNS LAWN CARE

    BROWNS LAWN CARE LawnSite Senior Member
    Posts: 615

  7. BROWNS LAWN CARE

    BROWNS LAWN CARE LawnSite Senior Member
    Posts: 615

    ok, i finished up this toolbox... it's ghetto, but effective...

    i decided to go without hardware and just use bungees for now.

    plus i really want a welder which would mean this box will go when i obtain one...

    [​IMG]
    [​IMG]
    [​IMG]
     

Share This Page