1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

buying a wheel motor, details inside

Discussion in 'Marketplace' started by birddseedd, Sep 17, 2012.

  1. birddseedd

    birddseedd LawnSite Silver Member
    Posts: 2,114

    I need a wheel motor for my toro 628E (model 74240 sereal 220000378)

    the toro part number is 1-523328

    the manufacturer (parker hannifin) model number is TF0240US081AADD.

    I can use other models of this wheel motor aswell, jsut post the parker model number off the end of it and i can tell if its compatable. might also be intereseted in a pump to go with it. been on the net all day lookiing for a used one. LS is my last stop before giving up.

    thanks

    mike
     
  2. GrasshoppersLLC

    GrasshoppersLLC LawnSite Senior Member
    Posts: 773

    Just have a local hydrolic shop rebuild it. Bout the same price as a used one but you will have all new stuff in it...
     
  3. birddseedd

    birddseedd LawnSite Silver Member
    Posts: 2,114

    waiting on an email now from a parker hannifin dealer to see about getting parts for it.
     
  4. GrasshoppersLLC

    GrasshoppersLLC LawnSite Senior Member
    Posts: 773

    If you can't get parts a hydro shop can I have a close friend that works at a hydro shop he's rebuilt pumps and wheel motors for me no prob.. Usually only cost about 3-350
     
  5. birddseedd

    birddseedd LawnSite Silver Member
    Posts: 2,114

    tough part is I can get a new one for 320. if I can find q used or parts for less its worth getting. but for new I can wait till next year.
     
  6. GrasshoppersLLC

    GrasshoppersLLC LawnSite Senior Member
    Posts: 773

    For 320 you might as well go new.. 300 is cheap now for stuff.. I would be happy it's only 300
     
  7. birddseedd

    birddseedd LawnSite Silver Member
    Posts: 2,114

    ya. problem is that its not just the motor. woudl have to at best rebuild the pump. then cleaner to clean it all out. new fluid.

    lookin at up twards 800 bucks. just isnt worth spending that at the end of hte season i dont think
     
  8. GrasshoppersLLC

    GrasshoppersLLC LawnSite Senior Member
    Posts: 773

    I just rebuilt pump in my one exmark.. Had to flush the entire system and lines.. New fluid and filter.. Luckily it was just the pump only costed me about 400 for rebuild and fluid
     
  9. DaveWB

    DaveWB LawnSite Senior Member
    from SE WI
    Posts: 265

    check out surpluscenter.com
     
  10. birddseedd

    birddseedd LawnSite Silver Member
    Posts: 2,114

    thanks. they didnt have my exact one. but they had ones that were close. ill keep looking hopefully thell get one.
     

Share This Page