can you move the torsion bars?

Discussion in 'Hustler Turf Equip (Archived)' started by lampeslawnservice, Mar 9, 2005.

  1. lampeslawnservice

    lampeslawnservice LawnSite Senior Member
    Posts: 323

    Just wondering if there is any plans to move the sway bars for the deck on the Super Z. The ones on the back side of the deck that stabilize the deck. If you moved them up higher on the deck it would open the door for a better stripe kit. One mounted directly behind the deck.
     
  2. lampeslawnservice

    lampeslawnservice LawnSite Senior Member
    Posts: 323

    anybody home?
     
  3. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    There are no plans to move the stabilizer bars on the back of the deck, it is not possible with out major redesign work, even if moved you would not have enough room for a good size roller.

    Pj
     
  4. Sriggs

    Sriggs LawnSite Member
    Posts: 9

    You can mount a caster type spripe kit onto the back of that leveler if you

    wanted to. Big leauge lawns has an adjestable kit with casters where your

    mounting arms could bolt into one of the exiting holes that is already there. I

    have a stripe kit on my supermini z that I used the holes that are in the

    frame under the engine for mine. I did'nt feel like takeing the whole mower to

    mount it on the back of the deck. try http://www.bigleaguelawns.com/ and

    look through it you should see what im trying to say about you could use the

    bolts on the deck leveler to mount these stripe kits. I hope this helps.
     

Share This Page