carb. removal from fh500v

Discussion in 'Mechanic and Repair' started by ml smith, Apr 29, 2013.

  1. ml smith

    ml smith LawnSite Member
    Posts: 6

    Mower is running rough and suspect carb. needs to be cleaned. I have had air filter off but am not sure if housing above needs to removed as well to gain access to choke and throttle cables for removal. Any help would be appreciated.
     
  2. Camaro865

    Camaro865 LawnSite Member
    Posts: 52

    its been a few days i'm sure you've figured it out by now. check the intake gaskets where they bolt to the head i've seen them fail then they start sucking in air and run like crap. spray some carb cleaner on them and listen to the motor.
     
  3. ml smith

    ml smith LawnSite Member
    Posts: 6

    Thanks for the tip....engine smoothed out with carb. spray...Now can you help my local dealer find parts diagrams for my mower?
     
  4. dutch1

    dutch1 LawnSite Silver Member
    from Jayhawk
    Posts: 2,231

  5. ml smith

    ml smith LawnSite Member
    Posts: 6

    New gaskets were the ticket! Mower running smooth! Bolts were actually loose! Thanks for the help
     

Share This Page