Carburator linkage help????

Discussion in 'Homeowner Assistance Forum' started by Fabric8r, Jun 6, 2012.

  1. Fabric8r

    Fabric8r LawnSite Member
    Posts: 11

    Hello i have a 2003 Exmark lazer z. it has a 27hp aircooled Kohler motor. i think the motor is a ch740. it has a keihin carburator.
    Im tring to find a picture of the Carbuator Linkage on it. I baught this mower as a parts mower and am rebuilding it. i think someone mixed up the springs and linkages. as the motor does not respond to idling up or down when lever is moved.
    I have the repair manual but the pictures are very unclear.
    Thanks Scott
     
  2. Fabric8r

    Fabric8r LawnSite Member
    Posts: 11

    ok heres some pics i found

    Choke%20Return%20Spring%20001%20%28Medium%29.jpg

    Choke%20Return%20Spring%20002%20%28Medium%29.jpg

    Choke%20Return%20Spring%20003%20%28Medium%29.jpg

    springlocation2.JPG

    springlocation.JPG
     
  3. Fabric8r

    Fabric8r LawnSite Member
    Posts: 11

    Ok theose were somne pics i fount online. they seem to look like how mine is set up. I just got to check that spring that is like a buterfly looking one.
    another spring i cant really figure out is from the back of the motor looking forward. on the left side of the carb. there is a spring wraped around a lingage with a U shape eng hanging out. this spring was just hanging loose. i think the loop go"s around the top of the linkage but am unsure.
     
  4. Fabric8r

    Fabric8r LawnSite Member
    Posts: 11

    ok found another pic on e-bay. Arrows indicate the spring i was wondering about. Looks like it wraps around the top of the lingage rod that is on the top. by top arrow. this is what i was unsure of.
    And yeah its ok I like talkin to myself... well hopefully this will help out others as well.

    33333.JPG
     
  5. MS_SURVEYOR

    MS_SURVEYOR LawnSite Bronze Member
    Posts: 1,002

  6. Fabric8r

    Fabric8r LawnSite Member
    Posts: 11

    Thanks for the link to the service manual. but i already have that. Its not very helpful for the linkage. it shows the 2 rear springs both going to the governer bracket arm. and thats what made me question mine, because they werent. but from the pictures i found, they are different from this manual. one spring go"s one way and the other the other way. and it doesnt even show the spring on the side of the carb.
     

Share This Page