case bobcat attachments

Discussion in 'Heavy Equipment & Pavement' started by DBFlawn, Sep 27, 2008.

  1. DBFlawn

    DBFlawn LawnSite Member
    Posts: 207

    hey its me again.

    well with my previous thread i think i'm gonna stay with the tires. but on a different note i was wondering if any of you guys know if BOBCAT skid steer attachments will fit a case machine.

    thanks in advance
    DBF
     
  2. ccstrebe

    ccstrebe LawnSite Senior Member
    Posts: 576

    Almost all attachments these days are built using a universal mounting plate. My custom scarifier started out as Bobcat attachment for my Case. Anything with hoses you might have to change the fittings.
     
  3. bobcat_ron

    bobcat_ron LawnSite Fanatic
    Posts: 10,099

    Anything will work except for Bobcat's hydraulic attachments like a hammer or grinders, somethings that require alot of pressure and a release behind the pressure. A good example is a Bobcat hammer that I ran on my Cat, it ran terrible, but they run good on a Bobcat, but a Cat hammer on a Bobcat will run even better than a Bobcat hammer will.

    Someone posted a thread about using a Bobcat pavement grinder on a Case and it damaged the Case skid steer hydraulics, but general bucket with hydraulic cylinders and light duty drive motors (i.e. sweepers) are fine.
     

Share This Page