chainsaw recoil

Discussion in 'Mechanic and Repair' started by vipermanz, Oct 12, 2002.

  1. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    i need to find a recoil spring and pulley's part numbers for an older homelite/textron chainsaw,

    Model 105152
    Serial 79780458

    it is right at 2.5"OD for the spring

    i have a pic of it if required, i don't even know where to begin!!!!!!!!
     
  2. Greg C.

    Greg C. LawnSite Member
    Posts: 2

    Post the pic that would help. What size saw is it?
     
  3. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    ok, it is really bent out of shape though, the saw has a 12" bar on it now (temp)

    recoil.jpg
     
  4. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    i've had no luck yet, if it helps it has XL on the housing and has an auto oiler
     
  5. Fish

    Fish LawnSite Member
    Posts: 139

    Stens catalog shows both the pulley and the spring. Any mower
    shop should be able to get them for you. Stens # 155-531 for
    the spring, #150-300 for the pulley. Jacks Small Engines sells
    Stens stuff online.
    Fish
     
  6. vipermanz

    vipermanz LawnSite Bronze Member
    Posts: 1,773

    yea, i found them!, thanks for the help!!
     
  7. Robert Doubrava

    Robert Doubrava LawnSite Senior Member
    Posts: 342

    Your model is probably an XL2 or such, or a Super XL. Good luck:)
     

Share This Page