1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Changing deck size on a Huster 37 WB

Discussion in 'Hustler Turf Equip (Archived)' started by ted5487, May 11, 2005.

  1. ted5487

    ted5487 LawnSite Member
    Posts: 23

    Is it possible to replace the 37 inch deck on my 2004 Hustler WB with a 48 inch deck? My model number is 925677 and serial number is 03100032. I was also wondering if I have the powder coat paint.
  2. mowerconsultant

    mowerconsultant LawnSite Fanatic
    Male, from Syracuse, NY
    Posts: 9,761

    You can install a 37" set up on your unit, but you will have to buy a carrier frame, new belt and set of drive tires and rims to do it, you will also need to replace the current wheel motors with wheel motors with top ports in them, the 48 and 54 inch units have rear hydraulic ports.
    As you can see it is quite a job, you may be better off trading it in on a 37" unit.
    I can e-mail you a parts manual if you like, you can see everything you need there.
    Your unit is not a powder coated unit, powder coated units generally start with 0403 as the first 4 digits of the serial #


Share This Page