Chute blocker for stander?

Discussion in 'Lawn Mowing' started by racer56, Oct 13, 2007.

  1. racer56

    racer56 LawnSite Senior Member
    from Kansas
    Posts: 285

    We just bought a new 36" RH stander and I would like to get a temp. chute blocker. Anyone make one for these? Can the bag still go on with the blocker intact?
     
  2. racer56

    racer56 LawnSite Senior Member
    from Kansas
    Posts: 285

    Anyone?:usflag: :usflag:
     
  3. cpel2004

    cpel2004 LawnSite Bronze Member
    Posts: 1,415

    Im looking at buying one of these but I wouldn't dare pay 6k for a 36. Im a big believer in buying used but some times you don't have a choice. I 've been looking for several months, they are in deed a rare item to find used.
     
  4. Greenery

    Greenery LawnSite Senior Member
    Posts: 512

    what I did was took the flap off and attatched a piece of angle iron to the spring loaded bracket and attatched some heavy duty rubber as a flap to the angle iron it works great the only thing is you need a strap to hold it up when you want to let it fly. This was a very quick mod i did i'm sure if someone put a little time into it they could do somthing much nicer.
     
  5. Greenery

    Greenery LawnSite Senior Member
    Posts: 512

    Oh and ya I just flip it up and put the bagger right on like normal
     

Share This Page