Clippings-N-The Mulch

Discussion in 'Lawn Mowing' started by Dingojoe, Apr 30, 2008.

  1. Dingojoe

    Dingojoe LawnSite Member
    Posts: 28

    Anyone have any suggestions besides the obvious on how to keep grass clippings out of the customers mulch? I'm new to the biz and have 10 client accounts, one of them is very picky about the mulch (which he should be, nice mulch job) Is there any suggestions on keeping it out besides blowing the discharge the other way? Would a mulching attachment on my Toro 52inch walk behind push the clippings down instead of out?

    Thanks,
     
  2. mcwlandscaping

    mcwlandscaping LawnSite Gold Member
    Posts: 3,164

    That would probably work for you, also, if you want to keep the discharge aspect of the mower you can get an OCDC for the mower. :)
     
  3. Dingojoe

    Dingojoe LawnSite Member
    Posts: 28

    Without sounding too ignorant as a newbie, what da H** is OCDC??
     
  4. MortonLawn

    MortonLawn LawnSite Senior Member
    Posts: 286

    Operator controlled discharge chute. its pretty much a mulch plate that you can "control" letting the grass discharge out of the mower or not. hope this helps.
     
  5. Dingojoe

    Dingojoe LawnSite Member
    Posts: 28

    It does, thanks! Can I get those from the manufacture of my mower or is there another brand that works better than another?
     
  6. traman

    traman LawnSite Senior Member
    Posts: 712

Share This Page