1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Cold Start Problem on Exmark Lazer Z

Discussion in 'Mechanic and Repair' started by mshulman, Apr 23, 2006.

  1. mshulman

    mshulman LawnSite Member
    Posts: 3

    I'm having problems starting my Lazer Z from a cold start. When turning the ignition, there is a clicking noise, but the engine does not turn. It goes on for a few minutes, and several attempts. After a few minutes of this, it will turn and start right up. I've replaced the batter and spark plug already, but obviously I haven't solved the problem. When the engine is warm, there is no problem. Any thoughts?
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023

    How about posting model and spec. numbers off the engine so we can see what you have.
  3. lucforce

    lucforce LawnSite Member
    Posts: 223

    I would guess that you have a safety switch issue if it is a relay clicking. If the starter is clicking then you have a bad spot in the starter.

Share This Page