1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community on the Franchising Forum.

    Dismiss Notice

Combine

Discussion in 'Eureka Fluid Film' started by gsanks, Jul 29, 2010.

  1. gsanks

    gsanks LawnSite Member
    Posts: 2

    is this safe to use around my farming equipment?
     
  2. Dano50

    Dano50 LawnSite Bronze Member
    Posts: 1,781

    Absolutely! Fluid Film will not harm paints, plastics or synthetic rubbers. Spray away!

    Any particular application you were thinking of?
     
  3. gsanks

    gsanks LawnSite Member
    Posts: 2

    well my lawnmower guy told me about this and I see you can get a free can to try it out, who do I email about the free can?
     
  4. flatlander42

    flatlander42 LawnSite Silver Member
    Posts: 2,239

    They sell the stuff at my local JD dealer!
     
  5. DLAWNS

    DLAWNS LawnSite Fanatic
    Posts: 5,778

    Just message Dano50 or Joyoffluidfilm about it and they will get you a sample can.
     
  6. Dano50

    Dano50 LawnSite Bronze Member
    Posts: 1,781

    Once you get your post count up just PM me and I'll get a sample can out.
     
  7. lotsagrass

    lotsagrass LawnSite Senior Member
    Posts: 610

    In my opinion, the stuff in the non-spray cans is far better than the aerosol. I'd recommend buying a non-spray can and use a brush to wipe it on some things you want to test it on. You'll get a much better look at how it works vs. using the spray can. I thought the spray was just 'ok', but once I bought a gallon can of this stuff, then I really saw how useful it was. :)
     
  8. Dano50

    Dano50 LawnSite Bronze Member
    Posts: 1,781

    Purchasing in bulk will definitely put on a thicker coat. You'll actually save money that way as well.
     

Share This Page