Concrete water feature

Discussion in 'Water Features' started by dclark2037, Mar 19, 2009.

  1. dclark2037

    dclark2037 LawnSite Member
    from Alabama
    Posts: 24

    I don't do water features that much and especially the great looking ones that you guys do on here, but me customer has ask me to look at his waterfall. It was built about 12 years ago and is natural rock with concrete. The problem is alot of the concrete is cracking around the rocks. What can we do to repair short of tearing it all out. He has several people look at but noone will come back to work on it. So i figure we could at leeast give it shot. Any suggestion would be great. Thanks in advance. David
     
  2. The Pondlady

    The Pondlady LawnSite Member
    from Georgia
    Posts: 15

    On what you described I would suggest a complete tear out and redo. If he wants you to repair, walk away. I would rather the customer be unhappy with someone else then with me.
     
  3. Mid-Ohio Scaper

    Mid-Ohio Scaper LawnSite Member
    Posts: 135

    Ditto!!!!!!!!!!!!
     
  4. tadpole

    tadpole LawnSite Bronze Member
    Posts: 1,216

    A complete rebuild is the ONLY practical solution.
     
  5. ANC Stone Creations

    ANC Stone Creations LawnSite Member
    Posts: 160

    Check and see if anyone in your area sprays polyureahea or shotcrete.

    Hope this helps you some.
     

Share This Page