Could I fit these on my trailer?

Discussion in 'Lawn Mowing' started by olebrooklawn, Mar 3, 2012.

  1. olebrooklawn

    olebrooklawn LawnSite Member
    Posts: 225

    A kubota z227 60 and exmark E 52 on a 6x12 trailer.
     
  2. orangemower

    orangemower LawnSite Silver Member
    from pa
    Posts: 2,773

    Park them tight with each other then break out the tape measure and you'll have your answer. Or you could measure out a 6x12 rectangle and park them in it.
    Posted via Mobile Device
     
  3. olebrooklawn

    olebrooklawn LawnSite Member
    Posts: 225

    i don't have the kubota yet thats why i ask.
     
  4. stonebridge

    stonebridge LawnSite Senior Member
    Posts: 865

    i put 2 dixie choppers on my 6x12 they are 74'' and it wont fit, so i had a welder friend come over and cut the front middle part of the rail out and welded the tongue area for storage. now both fit with no problem and i added alittle room for storage.
     
  5. TNGrassCutter

    TNGrassCutter LawnSite Bronze Member
    Posts: 1,321

    According to kubota website the 227 is 85 inches long, so probably not. Measure your exmark and add the 2 together and if its more than 144 inches they won't fit.
    Posted via Mobile Device
     
  6. stonebridge

    stonebridge LawnSite Senior Member
    Posts: 865

    most zero turns are around 7' long. thats one of the main reasons i like dixies they are almost 1' shorter and lighter
     
  7. TMlawncare

    TMlawncare LawnSite Bronze Member
    Posts: 1,197

    Won't fit, and where will you put your 21"?
     
  8. orangemower

    orangemower LawnSite Silver Member
    from pa
    Posts: 2,773

    Can you go to the dealer and measure one? Maybe just hit up the Kubota site and find the specs.
    Posted via Mobile Device
     

Share This Page