craftsman 42" deck seized bearing?

Discussion in 'Mechanic and Repair' started by The Intimidator, Sep 4, 2006.

  1. The Intimidator

    The Intimidator LawnSite Member
    Posts: 25

    hey fellas I have a craftsman riding mower here and I have had trouble with one side not cutting rite. So today I pulled the deck to check out the blades and pulleys and make sure I didn't have a bent or dull blade. The problem is the carrier bearing is seized up on the right side of the deck I was wondering how much it will be to replace this and if I need the carrier unit or just a bearing? also does anybody have a link to the parts I need I cant find any info on it thanks Dj
     
  2. Splicer

    Splicer LawnSite Senior Member
    Posts: 992

    Go to www.sears.com and type in your model # for parts list and pricing...
     
  3. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

  4. The Intimidator

    The Intimidator LawnSite Member
    Posts: 25

    thanks for the link,

    my model number is invalid and I can't seem to find anything abought it on google either.

    The model number is 944608450? It has a 19.5 horse power briggs engine 42 inch deck and it says special edition on the side lol any info thanks
     
  5. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    That looks like a serial number, Post ALL the numbers off the tag under the seat and I'll see what I can come up with.
     
  6. The Intimidator

    The Intimidator LawnSite Member
    Posts: 25

    ok here they are,

    first number on the sheet, 9446088450 says model number above.

    second number, 061898d004472 says serial number above.

    and in the lower right corner in small letters it says 146488.

    I am in canada so maybe that makes a difference? thanks for the help
     
  7. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022


    That must be what it is, Can you get a measurement on the height or length of the aluminum housing only without the shaft ? In inches then I will compare tomorrow when I return to work.
     
  8. The Intimidator

    The Intimidator LawnSite Member
    Posts: 25


    I could get it for you tomorrow lol I have packed it in for the night. No worries on the inches I have always measured in inches and I always will lol
     
  9. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    Sorry, Just wasn't sure how you'all do things waaaaaay up there. :hammerhead:
     
  10. Splicer

    Splicer LawnSite Senior Member
    Posts: 992

    Also eBay has several spindle assemblies for the 42" deck...
     

Share This Page