Crank length for lazer hp?

Discussion in 'Mechanic and Repair' started by LazerZHP, May 14, 2006.

  1. LazerZHP

    LazerZHP LawnSite Member
    from Maine
    Posts: 28

    Anyone one know what the length of the pto end of crank is for a cv20s in a kohler ? Spec # for engine 65553.looking for a replacement and find 1''x3.5/32 is common from the engine suppliers. Thanks in advace for any help.
    LazerZHP
     
  2. MowerMedic77

    MowerMedic77 LawnSite Bronze Member
    Posts: 1,164

    Sorry don't know the length, but according to your model and spec# provided the factory item# for your crank is 24 014 32-S. Hope this helps:)
     
  3. LazerZHP

    LazerZHP LawnSite Member
    from Maine
    Posts: 28

    MowerMedic thanks for the info,its a start in the right direction.
     
  4. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    You can convert this to standard measurements....

    Good Luck

    Kohler Twin Crank Mesuring.JPG

    CV20 PTO End Specs..JPG
     
  5. LazerZHP

    LazerZHP LawnSite Member
    from Maine
    Posts: 28

    Restrorob, Great info,searched everywhere for that info with no luck.May Have to order the engine i found with 1/4 shorter crank,and buy just the crank from kohler and do a swap.if there is enuf keyway going in to clutch,then i would try it with a 1/4" longer retaining bolt in pto end.or the bolt from the kawi motor 1/2" longer than kohler.Thanks for your help.
    LAzerZHP
     
  6. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,022

    Just to let you know, That crank is in the $ 165 range without tax and freight.


    Take care
     

Share This Page