1. Missed the live Ask the Expert event?
    Not to worry. Check out the archived thread of the Q&A with Ken Hutcheson, President of U.S. Lawns, and the LawnSite community in the Franchising forum .

    Dismiss Notice

Critique this Transformer

Discussion in 'Landscape Lighting' started by Venturewest, Dec 14, 2005.

  1. Venturewest

    Venturewest LawnSite Senior Member
    Posts: 513

    I have done many searches on lawnsite for low voltage lighting transformer information. There is alot on here, but there is alot of confusion. Not just because of the depth or complexity of the information, but because of the differing opinions contractors have given.

    So, to kind of summarize some of this information, I thought it would be helpful to get a critique on an 800 Watt transformer that I found on Ebay if a few of you wouldn't mind. Here is the link:

    If this is junk please tell me why. Thanks alot.


    I hope that works....I have never posted a link.
  2. Venturewest

    Venturewest LawnSite Senior Member
    Posts: 513

    Part of what I am confused about is if there is truly value in a "no-load" transformer if such a thing exists, and are all the major players in landscape lighting offering this type....ie:

    kichler, nightscaping, fx luminaire, cast lighting etc.
  3. NightScenes

    NightScenes LawnSite Silver Member
    Posts: 2,209

    The first thing that I notice on this transformer, is that it is not UL1838. This is the current code for low voltage landscape lighting. It also is not a multi tap, it has 200 watt circuits instead of 300 watt and the lugs are way too small. This is a VERY cheap transformer. I prefer the Kichler Pro series transformers. The FXL transformer is also very good. You can ask a hundred different designers about transformers and get a hundred different answers about their favorite one. I like the Kichler best because of the 12 thru 15 volt taps. The taps are also very large so you can put up to 9 12awg wires into one lug. I also like the breakers instead of the fuses that some transformers have. The best thing to do is try only the best ones. The others will cost you more in the long run.
  4. Gilla Gorilla

    Gilla Gorilla LawnSite Senior Member
    Posts: 923

    I just looked at the listing and then scrolled down to the bottom and looked at his other listings. Those tell the story in them selves, one hampton bay transformer and the other is malibu lights. Bottom of the barrel home owner stuff.
  5. NightScenes

    NightScenes LawnSite Silver Member
    Posts: 2,209

    There ya go!!
  6. YardPro

    YardPro LawnSite Gold Member
    Posts: 3,563


    all good transpromers are 300 watt legs
    they have multi tap connections..

    $250 list for that thing.... they are full of BS

    i like the vista's
    up to 15volt taps
    stainless steel
  7. Venturewest

    Venturewest LawnSite Senior Member
    Posts: 513

    Good info guys. I didn't realize how bad it was. Are there any good online sources for the Kichler or Vista transformers. I am not sure who here carries either. Ewing carries FX Illuminaire and my other main supplier only has Nightscaping. I will check out the websites.
  8. NightScenes

    NightScenes LawnSite Silver Member
    Posts: 2,209

  9. Frog Lights  LLC

    Frog Lights LLC LawnSite Member
    Posts: 191

    Please take a look at out high end transformer line that FP series. This is made by the same company that makes Vista. It is UL, Multi tap, stainless, built in timer, remote photo eye and the price is right. Life time warranty. We never had one fail. Merry Christmas to all
  10. YardPro

    YardPro LawnSite Gold Member
    Posts: 3,563

    i have a question..
    you say build in timer???
    the vista, hadco, etc DO NOT have built in timers.
    thier reason for this is that the timer is the most prone to failure... so thiers are plug in's ...

    why do you make yours a made in timer??????

Share This Page