Cub 2145 HDS Rider

Discussion in 'Mechanic and Repair' started by JDH, May 9, 2005.

  1. JDH

    JDH LawnSite Member
    Posts: 5

    When I start up the PTO, the blades will not engage? Could the clutch be the problem? Any help would be appreciated.
     
  2. Gautreaux's LNG

    Gautreaux's LNG LawnSite Senior Member
    Posts: 379

    It could be a couple of things, get a tester and check the switch. Without the mower running make sure when the switch is pulled the power goes to the clutch. It could be the connection of the wire to the clutch also. If the clutch has an adjustable air gap that may be all it needs. You will have to check a few things but you can get an answer pretty quick. Good luck
     

Share This Page