Custom made Kubota cupholder

Discussion in 'Original Pictures Forum' started by ThorVentures, Jun 17, 2007.

  1. ThorVentures

    ThorVentures LawnSite Member
    Posts: 35

    Had to weld up a chain hook anyway.....
    [​IMG]
     
  2. TheKingNJ

    TheKingNJ LawnSite Senior Member
    Posts: 781

    Won't you spill your beer that way?
     
  3. ThorVentures

    ThorVentures LawnSite Member
    Posts: 35

    ...no, once the bucket is all the way up, just open your mouth.
     
  4. johndeerefan

    johndeerefan LawnSite Member
    Posts: 78

    haha open your mouth and tilt the bucket
     
  5. ThorVentures

    ThorVentures LawnSite Member
    Posts: 35

    I used to have a tree guy who'd climb up, top and delimb, then yell at the top of his lungs "TIE A COLD BEER ON THE ROPE!"

    Yeah, good customer relations there...
     
  6. ke5hbd

    ke5hbd LawnSite Member
    Posts: 97

    Jrs use to be sponsor
     
  7. ThorVentures

    ThorVentures LawnSite Member
    Posts: 35

    I only used the Bud to cool off the weld, after i drank it.
     
  8. RedMax Man

    RedMax Man LawnSite Platinum Member
    Posts: 4,053

    Are you sure that will be strong enough?:)
     
  9. ThorVentures

    ThorVentures LawnSite Member
    Posts: 35

    I might need to beef it up for a keg.


    I load tested it with my pulverizer and a 4" thick granite arch foot bridge today. That was after pulling up a bunch of split rail posts. Probably the heaviest thing I'll ever lift will be 15" dia. concrete culvert pipe by 8 feet. Maybe a small stump if I don't have the excavator on the job.
     

Share This Page