Custom trailer for handling grass clippings

Discussion in 'Marketplace' started by Royalslover, Apr 30, 2012.

  1. Royalslover

    Royalslover LawnSite Senior Member
    Posts: 382

    This is a 2008 trailer that I bought as a flatbed and modified to handle clippings. It was made specifically for a Walker mower. I also have a Walker for sale. The trailer is rated at 10000#. The dumps work off your truck battery. You back your Walker into the trailer and dump it on the floor. The floor lifts up and dumps into the dump box. The dump box dumps to the side. You can get a Walker plus another mower on the back. I had a 60" Lazer Z that I could fit on there. If you have ramps you can also use the dump box as a place to put a mower. You can fit a 52" mower there with ease. The trailer has brakes on both axles, a 10000# pound center jack and an adjustable coupler. I'm asking $4500 obo. Please let me know if you have any questions. 913-710-3045 I tried to download pictures but couldn't. Let me know if you're interested and I will text them to you.
     
  2. CJCuttingEdge

    CJCuttingEdge LawnSite Member
    from USA
    Posts: 171

    I'd love to see some pictures of how this trailers set up
     
  3. lifetree

    lifetree LawnSite Fanatic
    Posts: 5,370

    Ditto on that !!
     
  4. KS_Grasscutter

    KS_Grasscutter LawnSite Gold Member
    Posts: 3,331

    I'd also like to see some pics, sounds like a neat setup.
     
  5. KrayzKajun

    KrayzKajun LawnSite Fanatic
    Posts: 10,742

    Definitely want to see pics!
     
  6. Puddle of Oil

    Puddle of Oil LawnSite Bronze Member
    Posts: 1,203

    Me too on the pics!
     
  7. tosainu1

    tosainu1 LawnSite Member
    Posts: 16

    me three on the pics..sent a pm...
     
  8. Royalslover

    Royalslover LawnSite Senior Member
    Posts: 382

  9. Royalslover

    Royalslover LawnSite Senior Member
    Posts: 382

    You would want a one ton dually for this thing. I pulled it with a 96 dodge one ton and it did perfectly. It does need some new plywood. I got out of the business before I could completley finish it. I was going to put a hydraulic tailgate on it but never quite got to it. I planned on on taking it all apart and having it sand blasted and painted but never quite got that far.
     
  10. OakNut

    OakNut LawnSite Platinum Member
    Posts: 4,052

    That is freaking AMAZING!

    Here, I figured out how to get your CL pics posted here for you! :)



    [​IMG]


    [​IMG]


    [​IMG]
     

Share This Page