cv23 loses rpms

Discussion in 'Mechanic and Repair' started by Morningside, Oct 6, 2009.

  1. Morningside

    Morningside LawnSite Member
    Posts: 153

    after i rebuilt the carb (kit) engine drops rpms when cutting ( tall or short grass) replaced fuse / pulse. new fuel filter, plugs, even replaced gas caps. any suggestion?
     
  2. Restrorob

    Restrorob LawnSite Fanatic
    Posts: 11,023


    I don't quite follow what you mean above, Did you get the throttle cable adjusted correctly after re-installation of the carb ?

    Did the governor spring drop off when you removed the carb ?
     
  3. Morningside

    Morningside LawnSite Member
    Posts: 153

    Sorry about that "fuse/pulse" should have been "FUEL/PULSE Pump". Govenor spring is in place. It just "feels" like the choke is partially engaged. It will run fine at high idle with blades engaged but when i start to cut, even SHORT grass, it will "Bogg down" it seems like only 3/4 throttle when cutting.
     

Share This Page