Deck lighting

Discussion in 'Landscape Lighting' started by Mark B, Jun 7, 2011.

  1. Mark B

    Mark B LawnSite Bronze Member
    Posts: 1,020

    What are you guys using to hide black wire when you have white picketts on a deck? There is really no good way to use another type of fixture other the deck lighting.

    I am thinking about using those picketts that are cut in half with a dado where the middle is cut out and hide the wire like that. Then just paint the new pickett white. This is just a plain deck with white pickets that are vertical.

    Any ideas? Cheers
     
  2. Mark B

    Mark B LawnSite Bronze Member
    Posts: 1,020

    Wow.. No one has had to do this in the past?
    Posted via Mobile Device
     
  3. Lite4

    Lite4 LawnSite Gold Member
    Posts: 3,112

    They sell white cable on the market, or just paint the cable white.
    Posted via Mobile Device
     
  4. Classic Lighting

    Classic Lighting LawnSite Senior Member
    Posts: 491

    I've used spray paint in the paint. Quick and easy. I also try to hide as much wire as possible.
     
  5. BrandonV

    BrandonV LawnSite Platinum Member
    Posts: 4,193

    unique can set you up w/ white fixtures and white wire... just did a job with similar
     
  6. Mark B

    Mark B LawnSite Bronze Member
    Posts: 1,020

    Thanks for the info.
    Posted via Mobile Device
     
  7. S&MLL

    S&MLL LawnSite Senior Member
    Posts: 751

    Dont let the wire show. Either dado a double grove and replace with flat stock. Or atleast use some post hugger trim.
     

Share This Page