Design Help

Discussion in 'Irrigation' started by hlgmoney, Jun 9, 2002.

  1. hlgmoney

    hlgmoney LawnSite Member
    Posts: 57

    I'm bidding on a large roadway irrigation project. The site requires irrigation to about 8-10 acres of which there are two large hills. The hills will require rotors and the tricky part is spacing the heads and dealing with the slope. Any suggestions would be appreciated.
     
  2. HBFOXJr

    HBFOXJr LawnSite Bronze Member
    Posts: 1,712

    Contact a reputable supply house.
     
  3. williamslawn

    williamslawn LawnSite Member
    from SC
    Posts: 202

    Contact WP Law in Lexington SC.
     

Share This Page